T3524-C Zigbee temperature, relative humidity and occupancy sensor

Zigbee wireless temperature, relative humidity and occupancy sensor

The T3524-CA is a lightweight easy to install 3-in-1 sensor that can accurately measure temperature and humidity and instantly report motion detection.


Product Description

The T3524-CA is a lightweight easy to install 3-in-1 sensor that can accurately measure temperature and humidity and instantly report motion detection.  The Zigbee technology used in the T3524-CA enables low cost, low power networking and real time data retrieval from the sensor.

The T3524-CA is an exceptional sensor that can offer a combination of motion detection and air quality without the need of cable for a battery life of up to 2 years depending on the level of motion measured. It can either run with 2 x AA lithium (recommended) or alkaline battery or an external power supply for long term installation.

The T3524-CA is a very flexible and versatile device, as it can be easily paired with other devices to control a thermostat, light or heating. Easy to deploy and featuring a configurable measuring interval and reporting time, the T3524-CA is one the most effective sensor of its kind.

KEY FEATURES

  • Combines temperature, humidity and motion detection
  • Battery based (2x AA)
  • Easy to install and configure
  • Detection range up to 6m and 120°
  • Temperature Measurement range 0-60°C
  • Temperature accuracy +/-0.5°C
  • Humidity range 0-100%
  • Humidity accuracy +/-4%
  • Up to 30m wireless communication using the 2.4GHz frequency
  • Fully configurable measurement interval and reporting interval
  • Security screw to avoid external tamper

APPLICATIONS

  • Indoor Air Quality and motion monitoring for research to understand building efficiency
  • Combination of temperature and motion for heating and light control
  • Humidity monitoring for air conditioning control

Additional Information

Weight0.1 kg
Dimensions80 x 80 x 20 mm
Temperature Sensor

Reading Range: 0 – 60°C
Accuracy: +/-0.5°C
Measurement Interval: User configurable but default value is 60s (minimum report interval will be used for temperature and humidity interval—Measurement done simultaneously)

Humidity Sensor

Reading Range: 0 – 100%
Accuracy: +/- 4% RH
Measurement Interval: User configurable but default value is 60s (minimum report interval will be used for temperature and humidity interval—Measurement done simultaneously)

Motion Sensor

Detection Range: Up to 6m
Detection Angle: 120°C
Detection Time: The sensor will send a zone unoccupied 5s after least movement

Interfaces

Wireless Zigbee: Integrated Zigbee module supports Zigbee PRO Features
Button: Device reset
LED User Feedback. Solid Red on initialisation

Frequency band

ISM 2.4 GHz

Network technology

Zigbee

Security protocol

HA Profile

Transmission range

Up to 30m (depending on Building Type)

Transmission Power

8dBm

Power requirements

5V External Power Supply
2x AA Lithium Battery or 2 x AA Alkaline with lower performance (battery life)

Operating Temperature

0°C to 50°C

Operating Humidity

0% to 100%

Battery Life

1 read per minute / 1.5 years (this depends on motion detected)
This is with a 200 motion detected per day

Reviews

There are no reviews yet.

Be the first to review “Zigbee wireless temperature, relative humidity and occupancy sensor”