Single phase two wire Din Rail energy meter with mechanical display


Single phase two wire Din Rail energy meter with mechanical display 1

£83.20

The MTR-EKC10 is a single phase two wire Din Rail energy meter with a mechanical display that ensures a high accuracy class (Class1).

In stock

Product Code: MTR-EKC10

Category:

Product Description

The MTR-EKC10 is a single phase two wire Din Rail energy meter with a mechanical display that ensures a high accuracy class (Class1).

CONSUMPTION INDICATION
There is a red LED which is used as indicating power consumption in the front panel of MTR-EKC10 series.
When consumption happens, the LED will flash red.

READING THE METER
The MTR-EKC10 series energy meter is equipped with a 5+1 mechanical display. Five integers are marked with black colour and one decimal is marked with red. This is used for recording consumption and can’t be reset to zero. The reading accuracy is 1/100 kWh.

PULSE OUTPUT
The MTR-EKC10 series energy meter is equipped with a pulse output which is fully separated from the inside circuit. That generates pulses in proportion to the measured energy for accuracy
testing. The pulse output is a polarity dependant, passive transistor output requiring an external voltage source for correct operation. For this external voltage source, the voltage (Ui) should is 5-27V DC, and the maximum input current (Iimax) is 27mA DC. To connect the impulse output, connect 5-27V DC to connector 20 (anode), and the signal wire (S) to connector 21 (cathode).

 

Specifications

Weight 0.12 kg
Dimensions 58.5 × 18 × 117.5 mm
Operating humidity

≤ 75%

Operating temperature

-10°C – +50°C

International standard

IEC 62053-21

Accuracy class

1

Protection against penetration of dust and water

IP51

Meter type

DRS-201A (register display)

Nominal voltage (UN)

230V AC

Operational voltage

161 – 300V AC

Insulation capabilities: - AC voltage withstand - Impulse voltage withstand

2KV for 1 minute
6KV – 1.2μS waveform

Basic current (Ib)

5A

Maximum rated current (Imax)

32A/45A

Operational current range

0.4% Ib- Imax

Operational frequency range

50Hz ±10%

Test output flash rate (RED LED)

1600imp/kWh

Download product brochure

Make an enquiry for this product

Please read our Privacy Policy before submitting your enquiry.

 

I acknowledge and agree to the Privacy Policy, available here.

 
[recaptcha]
 


Leave a Reply

Your e-mail address will not be published. Required fields are marked *