Refurbishing / extending your home? That’s the best time to get HeatingSave

We strongly believe that the best time to retrofit a Building Management System such as HeatingSave into your home is when you're refurbishing and/or extending it, as it enables the setup of a zoned heating system that will ultimately save a lot of energy and money.

Unfortunately, not everyone thinks the same way, as more than a fifth of people in the UK would prioritise building an annex to get more space in their home above investing in energy saving measures, according to the results of a Europe-wide 8,000 person survey published by E.ON, which asked respondents what they would do if they had to spend a large amount of money on their house.

In the UK, just 6% of all households had an energy efficient measure installed under the entire Energy Company Obligation (ECO) scheme, as of December 2016.

Another E.ON survey suggests almost three quarters (73%) of people have adopted smarter technologies in their homes.

HeatingSave — the perfect building energy control solution for any home

HeatingSave allows you to program each room separately. You can install the system initially to control the general heating/security and then as you decorate/refurb areas, chase in the small cables to allow you to implement zone control in every room. Matching the heating profile to your lifestyle is the key to making significant reductions in your fuel bills; even more so if your home is electrically heated.

If you are redecorating or refurbishing your home then this is the perfect time to install HeatingSave. Although some of our sensors are battery based wireless devices, the best option is always to run wires to the room sensors and heating devices; typically radiators. These are safe low voltage cable carrying 12 or 24 volts. Once the cable is in the wall it will last a lifetime. When our chairman installed HeatingSave in his home, he chose the wired devices where he could and only used wireless as a last resort.

If you build an annex or extension then you can expand your HeatingSave system accordingly. Your home will never be too big for HeatingSave.

If you'd like to find out more information on the HeatingSave system, just contact our dedicated team, they'll be more than happy to answer all of the questions and queries you might have.